NBA Ownership, Pricing And Projections
Connect Claude, ChatGPT or any MCP app to FTA and build tonight's NBA slate in the chat — projected GPP ownership, DraftKings and FanDuel salaries, and projections with ceiling, floor and value.
Annual + AI + Historical Data — $199.99/yr
Works with your AI — tap yours for step-by-step connect instructions:
Ownership, Pricing And Projections, In One Question
NBA is the sport that punishes tab-switching: a nine-game slate moves from the moment lines post to the moment lock hits, and the three numbers a lineup actually turns on — what a player costs, what FTA projects him for, and how owned the field will make him — normally live on three different pages. FTA runs an MCP server, the open standard AI assistants use to read outside data, so your assistant reads all three in one question. Ask who the chalk is under $6,000 and it comes back with the priced pool, the projection and the projected ownership together — not a screenshot.
It works anywhere MCP does — claude.ai, ChatGPT, Grok, Gemini, Perplexity, Le Chat, Cursor, Claude Code and any other MCP-compatible app. Step-by-step setup for each one is further down this page.
What You Can Ask
-
“Who's the chalk on tonight's DraftKings NBA main slate, and where's the leverage?”
Reads projected GPP ownership for the slate and cross-reads it against the same pool's ceiling projections.
-
“Best value plays on tonight's DraftKings NBA main slate under $5,000?”
Reads the main slate's priced pool — salary, projection, ceiling, floor and points per dollar.
-
“What does FTA project for tonight's NBA slate, and who has the highest ceiling per dollar?”
Pulls the slate projections FTA runs its own optimizer on, ranked however you ask for them.
-
“Which NBA points and rebounds props does FTA project an edge on tonight?”
Ranks tonight's sportsbook lines by FTA Edge Score, with the book and price attached.
What's Connected
Results page past the site's 50-row table limits, so your assistant can read a whole slate or a whole draft board in one go.
-
NBA projected ownership
Projected GPP ownership for tonight's slates and a player's ownership history slate by slate — the leverage read, without exporting anything.
-
NBA salaries & pricing
Every NBA slate on DraftKings and FanDuel — the priced player pool, salary by salary, with points per dollar and the value plays that fall out of it.
-
NBA projections
FTA projections for every player on the slate — median, ceiling, floor and minutes — the same numbers the site's own optimizer builds from.
-
NBA props
Points, rebounds, assists and threes lines from the book, with FTA's projected edge and EV on every line.
-
NBA player pages
Every tab of every NBA player page — game logs, splits, props, contracts, draft profiles and news — read straight into the conversation.
-
Scores & the rest of the site
Live and final NBA scores, box scores and stat leaderboards — plus NFL, MLB and NHL data and FTA's NFL VBD draft board, all on the one connection.
Want the raw files instead of a chat answer?
Every sport, back to 2020, DraftKings and FanDuel, as CSV — included with AI + Historical Data.
Get AI Access
Annual + AI + Historical Data
Just $16.67/mo, billed once a year.
Cancel anytime · Instant access
- Everything in FTA+ Annual
- Ask Claude, ChatGPT, Gemini & more anything about FTA data
- Download full historical DFS ownership — every sport, back to 2020, DraftKings and FanDuel, as CSV
- Full site data: props, projections, ownership, rankings, player pages
How To Connect
Every client points at the same server URL and signs you in with your normal FTA account. You click Connect, FTA asks you to log in, you click Authorize — that is the whole handshake. Nothing is copied by hand except the URL, and you never give the AI your password.
Server URL — you will paste this in a moment
https://mcp.fantasyteamadvice.com/mcp
Authorizing requires an FTA account on the Annual + AI + Historical Data plan. On any other plan the server answers with a plain-English message and an upgrade link instead of failing silently.
Pick the AI you are connecting
Connecting Claude claude.ai & desktop app
The same steps work on claude.ai in a browser and in the Claude desktop app — the settings screens are identical. Walked end to end on 2026-09-09.
Add FTA as a connector
- Open claude.ai in your browser and sign in. (Using the desktop app? Open that instead — everything below is in the same place.)
- Click your name or initials in the very bottom-left corner, then click Settings.
- A settings window opens with a list down the left. That list has two sections. Ignore the top one and look for the Customize heading lower down — click Connectors underneath it. You should see: Your connectors, with an Add button in the top-right corner. If you land on a near-empty page saying connectors "have moved to Customize", you clicked the old entry — go back and use the one under Customize.
- Click Add, top-right. (It is not at the bottom of the page.) You should see: A box titled Add custom connector.
- Type FTA in the Name box.
-
In the Remote MCP server URL box, paste
https://mcp.fantasyteamadvice.com/mcp— exactly that, no trailing slash and no spaces. - Click Continue. You should see: A second screen asking about Authentication and an OAuth client. This screen looks technical — you do not have to understand it.
- Change nothing on that screen. Claude has already worked out the right answers and marked them Detected: "Always required" and "No client ID — register one automatically". Leave those selected. You should see: One of the other options is labelled Recommended. Ignore it — it is a different sign-in method that FTA does not use. Trust the two marked Detected.
- Click Add. You should see: A page for FTA saying you are not connected yet, with a Connect button.
- Click Connect. You should see: The same tab moves to fantasyteamadvice.com. If you are already logged in here it goes straight to the permission screen; otherwise log in with your FTA email and password first.
- Click the Authorize button. You should see: You land back on Claude and FTA now shows a Disconnect button and a list of 24 read-only tools. Nothing pops up and no window closes — it all happens in the one tab.
Use it in a chat
- Start a new chat and ask the question below.
- The first time Claude reaches for an FTA tool it asks permission, offering Deny, Always allow and Allow once. Pick Always allow. You should see: Claude asks once per tool, not once overall, so "Allow once" means answering this again on the next question. FTA can only read — it cannot change anything in your account.
Menu names move between Claude releases. If the wording has drifted again, the parts that matter are the server URL and the Authorize button.
Using Claude in the terminal instead? That is the Claude Code tab.
Try asking
“Who's the chalk on tonight's DraftKings NBA main slate, and where's the leverage?”
Connecting ChatGPT chatgpt.com
You need a paid ChatGPT plan — Plus, Pro, Business or Enterprise. On the free plan the menus below simply are not there, so check this first. Custom connectors are still labelled beta by OpenAI. Walked end to end on 2026-09-09.
First, turn on developer mode
- Open chatgpt.com and sign in.
- Click your name in the bottom-left corner, then click Settings.
- Click Security and login in the left-hand list, then scroll to the very bottom. You should see: A Developer mode section. (There is also a shortcut to it at the bottom of the Plugins settings page.)
- Switch Developer mode on. If it is already on, leave it. You should see: It carries an ELEVATED RISK warning about connectors that could erase data. That warning is OpenAI's blanket wording for any connector it has not reviewed. Every FTA tool is read-only — ChatGPT labels them READ — so FTA cannot change or delete anything. Without this switch there is no way to add FTA at all.
Add FTA
- In the same Settings window, click Plugins in the left-hand list. (This is what used to be called "Apps & Connectors" — MCP servers live under Plugins now.)
- Close Settings, then click Plugins in the main left-hand menu. You should see: A page headed Plugins with a search box, and a + button just to the right of it.
- Click the + button. (There is no button that says "Create".) You should see: A box titled New Plugin.
- Type FTA in the Name box. Description is optional — leave it empty.
-
Leave Connection set to Server URL and paste
https://mcp.fantasyteamadvice.com/mcpinto the box below it. - Leave Authentication set to OAuth. Do not change it — FTA has to know whose account is asking.
- Tick I understand and want to continue, then click Create. You should see: A panel headed "Add FTA to ChatGPT" with a Sign in with FTA button.
- Click Sign in with FTA. You should see: A small window opens on fantasyteamadvice.com. If you are already logged in here it goes straight to the permission screen.
- Click Authorize. You should see: The window closes on its own and a green FTA is installed message appears.
- If the FTA page shows "No app actions available yet", click Refresh next to Information. You should see: The list fills in with FTA's tools, each tagged READ.
Use it in a chat
- Open a new chat and click the + button at the left-hand end of the message box. You should see: A menu listing FTA among the options.
- Click FTA to switch it on for this chat, then ask the question below.
OpenAI moves these menus around often. If the names have drifted again, hunt for the box that takes an MCP server URL — that plus the OAuth sign-in is the whole job.
Try asking
“Find NFL receiving-yards props where FTA projects an edge over the book.”
Connecting Grok grok.com
Custom connectors arrived with xAI's May 2026 rollout and need a paid Grok tier. Set one up on grok.com in a browser and the Grok apps on iOS and Android pick it up too — you only do this once.
- Open grok.com in your browser and sign in.
- Go to grok.com/connectors. You can also get there from your profile picture in the bottom-left corner: Settings, then Connectors. You should see: A page of connectors for things like Google Drive and GitHub.
- Click New Connector. You should see: A choice between the ready-made connectors and building your own.
- Choose Custom — the option that asks you for a server URL rather than a brand name.
-
Type
FTAas the name. -
In the server URL box, paste
https://mcp.fantasyteamadvice.com/mcp— exactly that, no trailing slash and no spaces. - If it asks for a transport or a server type, pick Streamable HTTP (sometimes shown as just HTTP). Not SSE, not stdio.
- Save, then click Connect. You should see: A new tab opens on fantasyteamadvice.com and asks you to log in.
- Log in with your FTA email and password — the same login you use on this site. If you are already logged in here, it skips straight past this.
- Click the Authorize button. You should see: The tab closes itself, you land back on Grok, and FTA now reads as Connected.
- Start a new chat, check that FTA is switched on in the connectors menu under the message box, and ask the question below.
Custom connectors are a paid-tier feature. If that page has no New Connector button at all, your Grok plan does not include them yet.
xAI moves these screens between releases. If the labels do not match what you see, hunt for the box that takes an MCP server URL — that plus the Authorize click is the whole job.
Try asking
“Where does FTA project an edge on tonight's NBA points props?”
Connecting Gemini Gemini CLI
The consumer Gemini app at gemini.google.com does not take custom MCP servers yet. The supported route today is the free Gemini CLI, which runs in a terminal window.
-
Open a terminal. On a Mac: press Cmd + Space, type
Terminal, press Enter. On Windows: open PowerShell from the Start menu. -
Type
node -vand press Enter. You should see: A version number such as v22.3.0. If it says "command not found", install Node.js 20 or newer from nodejs.org, then come back to this step. - Install the Gemini CLI with the first command below, and wait for it to finish. You should see: A wall of install text, then your prompt back.
-
Type
geminiand press Enter, then sign in with your Google account when the browser window opens. -
Type
/quitand press Enter to drop back to the terminal. -
Run the second command below. It points Gemini at
https://mcp.fantasyteamadvice.com/mcp. You should see: A one-line confirmation that the server "fta" was added. -
Start Gemini again with
gemini, then type/mcpand press Enter. You should see:ftalisted among your MCP servers. - Ask the question below. The first time, Gemini opens your browser: log in to FTA and click Authorize, then return to the terminal.
npm install -g @google/gemini-cli
gemini mcp add --transport http fta https://mcp.fantasyteamadvice.com/mcp
Google is still rolling MCP support through its products, so flag names can change between CLI releases. If mcp add is rejected, run gemini mcp --help to see the current wording.
Try asking
“Give me FTA's top 10 running backs by VBD for a 12-team PPR draft.”
Connecting Perplexity perplexity.ai
Perplexity is rolling custom connectors out by plan. If you have no Connectors tab at all, your plan does not include them yet.
- Open perplexity.ai in your browser and sign in.
- Click your profile picture or initials in the bottom-left corner, then click Settings.
- Open the Connectors tab. You should see: Connectors for things like Gmail, Notion and Google Drive.
- Click Add Connector. You should see: A list of ready-made connectors, with a custom or advanced option at the bottom.
- Choose the custom / advanced option — the one that asks you for a server URL rather than a brand name.
-
Type
FTAas the name. -
Paste
https://mcp.fantasyteamadvice.com/mcpinto the server URL box. - If it asks for a transport or a server type, pick Streamable HTTP (sometimes shown as just HTTP). Not SSE, not stdio.
- Save, then click Connect. You should see: A window opens on fantasyteamadvice.com asking you to log in.
- Log in with your FTA email and password, then click Authorize.
- Start a new thread, open the sources or connectors menu above the answer box, and make sure FTA is switched on. Then ask the question below.
Perplexity renames these screens fairly often, and the custom-connector option is sometimes buried under "Advanced". The URL and the Authorize click are the parts that never change.
Try asking
“What does FTA project for tonight's FanDuel MLB slate — best value plays under $4,000?”
Connecting Le Chat Mistral AI
Le Chat keeps its MCP servers under Intelligence rather than under Settings, which is the one place people get stuck. Custom connectors need a Mistral plan that includes them.
- Open Le Chat at chat.mistral.ai and sign in.
- Open Intelligence from the left-hand sidebar. You should see: A page grouping the things Le Chat can reach — connectors, tools and memories.
- Click Connectors. You should see: Ready-made connectors for things like Google Drive, Notion and GitHub.
- Click Add connector.
- At the top of the pop-up, switch to the Add custom connector tab. The first tab only offers the ready-made ones. You should see: A short form asking for a name and a server URL.
-
Type
FTAas the name. -
Paste
https://mcp.fantasyteamadvice.com/mcpinto the server URL box — nothing else in the box. - If it asks for a transport or a server type, pick Streamable HTTP (sometimes shown as just HTTP). Not SSE, not stdio.
- Click Connect. You should see: A window opens on fantasyteamadvice.com and asks you to log in.
- Log in with your FTA email and password, then click Authorize. You should see: The window closes and FTA appears in your connector list as connected.
- Start a new chat, make sure FTA is switched on in the tools menu beside the message box, and ask the question below.
Mistral ships quickly and renames these screens with it. If there is no Intelligence entry, look under Settings for Connectors — the custom-connector tab and the Authorize click are the parts that never change.
Try asking
“Which NHL goalies does FTA like tonight, and what's the projected ownership on them?”
Connecting Cursor Cursor editor
Cursor speaks MCP natively. You are adding a URL-type server, not a command-type one.
- Open the Cursor app.
- Press Cmd + Shift + J on a Mac, or Ctrl + Shift + J on Windows and Linux. You should see: The Cursor Settings screen. You can also get there from the menu: Cursor → Settings → Cursor Settings.
- In the left-hand list click MCP (newer builds label it MCP & Integrations).
- Click + Add new MCP server.
- Choose the URL (or HTTP) server type — not Command and not stdio.
-
Name it
ftaand pastehttps://mcp.fantasyteamadvice.com/mcpas the URL, then save. If Cursor opens amcp.jsonfile instead of a form, paste the block below into it and save. - Cursor opens your browser. Log in to FTA and click Authorize.
- Switch back to Cursor and look at the MCP screen again. You should see: A green dot next to fta and a count of the tools it found.
- Open the chat pane with Cmd + L (Ctrl + L on Windows), switch it to Agent mode, and ask the question below.
{
"mcpServers": {
"fta": {
"url": "https://mcp.fantasyteamadvice.com/mcp"
}
}
}
Cursor ships fast and its settings labels move with it. If MCP is not in the sidebar, search the settings for "MCP" — the URL is the only thing you actually need to get in there.
Try asking
“Pull FTA's NFL draft board for rounds 1 to 3 and compare it with market ADP.”
Connecting Claude Code terminal
Two commands and a browser login. This is the fastest route on the page.
- Open a terminal — Terminal on a Mac, PowerShell or Windows Terminal on Windows.
-
Type
claude --versionand press Enter. You should see: A version number. If it says "command not found", install Claude Code first, then come back to this step. -
Run the command below. It registers
https://mcp.fantasyteamadvice.com/mcpunder the namefta. Add--scope useron the end if you want FTA in every project rather than just this folder. You should see: A confirmation line naming the HTTP MCP server "fta". -
Type
claudeand press Enter to start Claude Code. -
Type
/mcpand press Enter. You should see: A list of servers with fta in it, marked as needing authentication. - Move to fta with the arrow keys, press Enter, then choose Authenticate. You should see: Your browser opens on fantasyteamadvice.com.
- Log in with your FTA email and password, then click Authorize.
-
Go back to the terminal and run
/mcponce more. You should see: fta now reads as connected, with its tools listed. Ask away.
claude mcp add --transport http fta https://mcp.fantasyteamadvice.com/mcp
If /mcp shows fta as failed, the usual cause is a typo in the URL. Run claude mcp remove fta and add it again with the copy button.
Try asking
“Show me FTA's projected GPP ownership for Sunday's main slate, sorted highest first.”
Connecting Other apps VS Code, Zed & more
MCP is an open standard, so any app that speaks it can read FTA — there is no per-app deal and nothing to install on our side. The server URL is the entire configuration; the only thing that differs between apps is which menu hides it.
- Open your app's settings and find its MCP section. Most call it MCP servers; some file it under Tools, Extensions or Integrations.
- Add a new server and choose the remote kind — labelled HTTP, Streamable HTTP or URL. Not Command, not stdio, not SSE.
-
Name it
fta. -
Paste
https://mcp.fantasyteamadvice.com/mcpas the URL and save. You should see: fta in the app's server list, usually flagged as needing sign-in. - The app opens your browser. Log in with your FTA email and password, then click Authorize. You should see: The tab closes and the app now lists fta as connected, with a count of its tools.
- Switch the app into its agent or chat mode and ask the question below.
Where the setting lives
- VS Code — you need GitHub Copilot. Open the Chat view, switch it to Agent mode, then Configure Tools, Add MCP Server, HTTP.
- Windsurf — Windsurf Settings, then Cascade, then MCP Servers, then Add server and the custom option.
- Zed — open the Agent Panel's settings and look for Model Context Protocol Servers, then Add Custom Server.
- Raycast — you need Raycast AI. Search Raycast for Manage MCP Servers, then add a server pointing at the URL.
https://mcp.fantasyteamadvice.com/mcp
If your app wants a JSON config file rather than a form, the block on the Cursor tab is the shape it expects — fta plus a url, nothing else.
These apps ship MCP support at their own pace and rename the screens as they go. Whatever the labels say, you are looking for the box that takes an MCP server URL.
Try asking
“Pull FTA's NFL draft board for rounds 1 to 3 and compare it with market ADP.”
Claude, ChatGPT, Grok, Gemini, Perplexity, Le Chat and Cursor are products of Anthropic, OpenAI, xAI, Google, Perplexity AI, Mistral AI and Anysphere; VS Code, Windsurf, Zed and Raycast belong to their makers likewise. All product names and logos are trademarks of their respective owners; FTA is not affiliated with, endorsed by or sponsored by any of them, and you need your own account on a plan that supports connectors.
What To Know
An assistant will happily read a number out loud without saying how solid it is, so the server says it for us: every response carrying projections, ownership or rankings ships with the same advisories and disclaimers you would see on the page they came from — machine-readable, so the model can repeat them.
-
Projections refine toward lock
Initial projections are computer-generated; FTA admins refine them as lock approaches, so accuracy is highest close to kickoff. Responses carry how many days are left before the next kickoff, so a Tuesday answer is labelled as the early-week machine output it is. -
Ownership is model output
Ownership percentages are algorithmically generated by our machine learning model and may not always be accurate. They solidify as lock approaches. On showdown and other short slates — and on every NHL slate — they are flagged beta: directional, not exact, with far less training data behind them than main slates. -
Props and futures are informational
Lines and odds change frequently — confirm the current numbers with the sportsbook before placing any wager. Past performance does not guarantee future results, and the bettor assumes all risk. If you or someone you know has a gambling problem, call 1-800-GAMBLER or visit ncpgambling.org. -
Billing and clients
The tier bills through Stripe; PayPal subscriptions cannot carry it yet, so contact support to move over. On the AI side you need your own account with whichever assistant you connect, on a plan of theirs that supports connectors — the setup steps above say which ones do.